Vacuum Parts in Richland and Mansfield OH
Do you know where to purchase quality vacuum parts in Richland and Mansfield, OH? We use vacuum cleaners to take care of dust and dirt in our homes. Expectations are that vacuums should work each time we flick the switch or step on the power pedal. Unfortunately, vacuum cleaners have not been made to last forever, this can leave us with big problems. No suction is one of the top complaints heard when someone brings a vacuum to Watson’s Discount Vacuum on Claremont Ave in Ashland, Ohio. Fortunately, if the problem is minor and all that is needed is a replacement part, a complete line of used and new vacuum parts including bags, belts, and filters can be found at Watson’s. To determine if you need a replacement part or a repair, please continue reading this post.
Top Six Reasons For Vacuum Suction Problems And Vacuum Parts For Repair:
1. A clogged air filter is one reason a vacuum stops picking up dirt, therefore, try cleaning the air filter. If there is still no suction, because we stock a full selection of vacuum parts for customers in Richland and Mansfield, OH, you should stop by and ask about replacing your air filter.
2. Another reason for suction failure is a clogged exhaust filter. These can also become torn or damaged resulting in lack of suction. Consequently, removing and cleaning this filter may solve the clogged problem. If there is still no suction, a new exhaust filter from Watson’s will be your answer.
3. A surprising vacuum part that can become clogged, resulting in low or no suction is the vacuum hose. To discover if this is the problem, unplug the vacuum, remove the hose, stretch it out until it is straight and then shine a flashlight through one end of the hose. If you cannot see the light through the other end, there may be an obstruction in the hose. Improve the suction by dislodging whatever it is that is causing the obstruction.
4. A proper vacuum bag is necessary for good suction unless you are fortunate to own a bagless model. When the bag becomes full with dust and dirt, the vacuum cleaner will stop working. Your vacuum manufacturer will suggest the proper timing for cleaning or replacing the bag.
5. Dust Cup Assembly is another part that can present a problem if it becomes cracked or broken. If the dust cup is not properly sealed the suction may exist but is too weak to pick up debris. A quick examination at Watson’s can help determine if this is the culprit.
6. The last vacuum cleaner part that can contribute to the lack of suction is the blower wheel. If this part becomes broken or jammed, it won’t turn freely or it may become difficult to turn. Typically, if there is nothing rubbing against the blower wheel, but the wheel is still difficult to turn, than the problem may be that the motor is not working properly. In this case, discuss your vacuum’s symptoms with the staff at Watson’s Discount Vacuum for diagnosis and solution to your problem.
Stop By or Call 800-860-2127 for Assistance
Watson’s Vacuum takes away the worry by giving free estimates and vacuum repairs, so you have everything to gain by letting them solve your vacuum-cleaning problem. We also pride ourselves on giving 24-hour or less turn-around service when requested, which is perfect for our clients with busy lives. Anyone in need of vacuum parts in Richland and Mansfield OH should give Watson’s Discount Vacuum a call at 800-860-2127. We are based in Ashland, OH and would be more than happy to serve you!